SEMITI SL70 vs Chemours Ti-Pure Slurry
SEMITI SL70 matches Chemours Ti-Pure slurry as a 70% solids drop-in for waterborne paint and paper coating.
Chemours offers Ti-Pure underlying chloride rutile in 70% slurry form for direct pumping in paint plants. SEMITI SL70 is the direct alternative.
Side-by-side specification
Typical published specs for the two grades. Customer-specific CoA on inquiry.
| Property | SEMITI SL70 | Chemours Ti-Pure Slurry |
|---|---|---|
| Solids content | 70% | 70% |
| Viscosity range | 1000–2500 cP | 1000–2500 cP |
| Storage stability | 12 months | 12 months |
| Landed cost | 30% lower | Reference |
Bold amber indicates the column with the stronger value on that line.
When to choose which
Choose
SEMITI SL70
- →Cost-optimization in waterborne paint plants
Choose
Chemours Ti-Pure Slurry
- →Established Chemours slurry supply relationship
Drop-in substitution
Direct pump-line substitution. 1 t pilot batch recommended.
Pricing context
30% landed cost advantage in Asia.
Bottom line
Direct slurry alternative.
Common questions
Can SEMITI SL70 substitute Chemours Ti-Pure Slurry directly in a waterborne paint plant?+
Yes — same solids content (70%), same Brookfield viscosity range (1000–2500 cP at 25°C), same 12-month storage stability. Use the same pumping equipment and letdown procedure. Run a 1 t pilot batch to confirm viscosity compatibility with your plant system before bulk switch.
How much cheaper is SEMITI SL70 vs Chemours Ti-Pure Slurry?+
SEMITI SL70 offers approximately 30% lower landed cost in Asia vs Chemours Ti-Pure Slurry. For large waterborne paint plants consuming slurry in volume, this per-kg advantage on a high-consumption ingredient is significant.
When should I keep using Chemours Ti-Pure Slurry rather than switching?+
Keep Ti-Pure Slurry when you have an established Chemours slurry supply relationship with integrated technical support, or when your plant is part of a Chemours preferred-supplier program. For plants with cost-optimization goals and no Chemours lock-in, SEMITI SL70 is the direct cost-competitive alternative.
Request SEMITI SL70 sample for Chemours Ti-Pure Slurry substitution trial
Free 25 kg sample for technical evaluation. We typically respond within 24 hours UTC+8. FOB / CIF / DDP terms available to most ports worldwide.