Ti
tio2agentsSEMITI
Menu
ProductsIndustriesCompareToolsMarketsLearn
Compare

SEMITI 2310 vs Chemours Ti-Pure R-960

SEMITI 2310 is universal plastics; Ti-Pure R-960 is engineering plastics premium. Choose by carrier polymer.

These overlap in plastics masterbatch but at different performance tiers. SEMITI 2310 is universal plastics (PE/PP/PVC/PS/ABS commodity); Ti-Pure R-960 is engineering plastics premium (ABS/PC/PA at 300°C). For matching R-960 directly, see SEMITI 960.

Side-by-side specification

Typical published specs for the two grades. Customer-specific CoA on inquiry.

PropertySEMITI 2310Chemours Ti-Pure R-960
Universal plasticsOptimizedCapable
Engineering plastics (300°C)AcceptableOptimized
CostLower (universal grade)Higher (premium)

Bold amber indicates the column with the stronger value on that line.

When to choose which

Choose
SEMITI 2310
  • →Commodity plastic compounding
Choose
Chemours Ti-Pure R-960
  • →Engineering plastics — choose SEMITI 960 (closer match)

Drop-in substitution

For direct R-960 substitution, use SEMITI 960 (engineering plastics grade), not SEMITI 2310 (universal grade).

Pricing context

SEMITI 2310 is mid-tier; SEMITI 960 is premium-tier.

Bottom line

For engineering plastics: SEMITI 960. For commodity: SEMITI 2310.

Full SEMITI 2310 details

rutile · chloride
SEMITI 2310
Universal Plastics Rutile

Universal plastics rutile — direct alternative to Kronos 2310 for PVC, PE, PP, ABS.

Full TDS, specifications, dosage →

Common questions

Can SEMITI 2310 substitute Ti-Pure R-960 in engineering plastic masterbatch?+
Not ideally — Ti-Pure R-960 is an engineering plastics premium grade (300°C thermal stability, amine-compatible surface treatment for HALS systems). SEMITI 2310 is a universal plastics grade optimized for commodity PE/PP/PVC/ABS at 280°C. For direct R-960 substitution in engineering plastics, use SEMITI 960 instead.
When is SEMITI 2310 the right choice vs Ti-Pure R-960?+
SEMITI 2310 is the right choice for commodity plastic compounding — PE/PP film, PVC compound, PS/HIPS injection molding — where the 280°C thermal stability is sufficient and the R-960 premium is not justified. For ABS/PC/PA at 300°C, use SEMITI 960.
How does the cost compare between SEMITI 2310 and SEMITI 960 vs Ti-Pure R-960?+
SEMITI 2310 (universal grade) is mid-tier pricing; SEMITI 960 (engineering plastics grade) is premium-tier, but both deliver roughly 35% savings vs Ti-Pure R-960. If your application is truly engineering plastics at 300°C, the right SEMITI grade is 960 — don't compromise on thermal stability to save on grade cost.

Request SEMITI 2310 sample for Chemours Ti-Pure R-960 substitution trial

Free 25 kg sample for technical evaluation. We typically respond within 24 hours UTC+8. FOB / CIF / DDP terms available to most ports worldwide.

Email about substitutionSubmit inquiry